Setting VLAN

Konfigurasi Switch0:

Switch>ena

Switch#conf t

Switch(config)#vlan  10

Switch(config-vlan)#name dosen

Switch(config-vlan)#exit

Switch(config)#vlan  20

Switch(config-vlan)#name mahasiswa

Switch(config-vlan)#exit

Switch(config)#int fa0/1

Switch(config-if)#switchport access vlan 10

Switch(config-if)#exit

Switch(config)#int fa0/2

Switch(config-if)#switchport access vlan 20

Switch(config-if)#exit

Switch(config)#int fa0/23

Switch(config-if)#switchport mode trunk

Switch(config-if)#exit

Switch(config)#int fa0/24

Switch(config-if)#switchport mode trunk

Switch(config-if)#exit

Konfigurasi Switch1:

Switch>ena

Switch#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#vlan  10

Switch(config-vlan)#name dosen

Switch(config-vlan)#exit

Switch(config)#vlan  20

Switch(config-vlan)#name mahasiswa

Switch(config-vlan)#exit

Switch(config)#int fa0/1

Switch(config-if)#switchport access vlan 10

% Access VLAN does not exist. Creating vlan 10

Switch(config-if)#exit

Switch(config)#int fa0/2

Switch(config-if)#switchport access vlan 20

% Access VLAN does not exist. Creating vlan 20

Switch(config-if)#exit

Switch(config)#int fa0/24

Switch(config-if)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up

Switch(config-if)#exit

Konfigurasi Router0:

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#no ip add

Router(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int fa0/0.10

%LINK-5-CHANGED: Interface FastEthernet0/0.10, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.10, changed state to up

Router(config-subif)#encapsulation dot1q 10

Router(config-subif)#ip add 192.168.10.1 255.255.255.0

Router(config-subif)#exit

Router(config)#int fa0/0.20

%LINK-5-CHANGED: Interface FastEthernet0/0.20, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.20, changed state to up

Router(config-subif)#encapsulation dot1q 20

Router(config-subif)#ip add 192.168.20.1 255.255.255.0

Router(config-subif)#exit

Posted in: tugas jarkom